Bridon®

Dyform DSC10 PI

Bridon Dyform® DSC10 PI is a high performance compacted parallel laid rope construction, with all the strands within the rope being spun/ twisted together in one operation.

This type of rope can only be used where both ends are fixed and the load prevented from rotating

Looking for a quote or more info?

Applications

Offshore cranes
Construction cranes
Industrial cranes

Advantages

Excellent fatigue life
High breaking strength
Good crush resistance
Good wear characteristics due to its Dyform® strands

Downloads

Bridon Dyform® DSC10 PI Datasheet

Bridon Dyform® DSC10 PI specification

^{Note for more detailed information please download the brochure above.}

Tables

Diameter		Minimum Breaking load
Diameter		1960			2160
mm	in	kN	Tons (metric)	Tons (short)	kN	Tons (metric)	Tons (short)
8	5/16	60.7	6.19	6.82	63.4	6.47	7.13
9	-	77.7	7.92	8.73	97.9	9.98	11.00
-	3/8	95.9	9.78	10.80	91.1	9.29	10.2
10	-	96.9	9.88	10.9	100	10.2	11.3
11	-	116	11.9	13.1	122	12.4	13.7
-	7/16	119	12.1	13.3	124	12.7	14.0
12	-	142	14.5	16.0	149	15.2	16.8
-	1/2	158	16.1	17.7	165	16.9	18.6
13	-	161	16.4	18.1	168	17.1	18.9
14	-	190	19.3	21.3	198	20.2	22.3
-	9/16	204	20.8	22.9	213	21.8	24.0
15	-	220	22.4	24.7	230	23.4	25.8
16	5/8	253	25.8	28.4	265	27.0	29.8
17	-	284	29.0	32.0	298	30.4	33.5
18	-	314	32.0	35.3	328	33.4	36.9
19	3/4	353	35.9	39.6	369	37.6	41.4
20	-	393	40.1	44.2	412	42.0	46.3
21	-	432	44.1	48.6	452	46.1	50.8
22	-	474	48.3	53.2	496	50.6	55.8
-	7/8	480	49.0	54.0	503	51.3	56.5
23	-	511	52.1	57.5	535	54.6	60.1
24	-	559	57.0	62.8	585	59.7	65.8
25	-	612	62.4	68.8	640	65.3	72.0
-	1	627	63.9	70.5	656	66.9	73.8
26	-	661	67.4	74.3	692	70.5	77.8
28	-	769	78.4	86.4	804	82.0	90.4
-	1 1/8	818	83.4	92.0	856	87.3	96.2
30	-	883	90.0	99.2	924	94.2	104
32	1 1/4	995	101.0	112	1040	106	117
34	-	1128	115	127	1180	120	133
35	1 3/8	1180	120	133	1234	126	139
36	-	1276	130	143	1335	136	150
38	1 1/2	1401	143	157	1466	149	165
40	-	1567	160	176	1640	167	184
-	1 5/8	1657	169	186	1734	177	195
42	-	1726	176	194	1807	184	203
44	1 3/4	1915	195	215	2004	204	225
46	-	2085	213	234	2182	222	245
48	1 7/8	2265	231	255	2370	242	266
50	-	2452	250	276	2566	262	288
-	2	2531	258	285	2648	270	298
52	-	2633	268	296	2755	281	310
58	-	3180	324	357	3500	357	393

^{This table is for guidance purpose only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bekaert.}

WRI® DyPac 18

WRI® DyPac 18 series is a compacted rotation resistant rope construction consisting of an inner rope laid in one direction and an outer layer of strands laid in the opposite direction.

WRI® PS 620

In the crane and industrial industry, the WRI® PS 620 rope is a general purpose 6 strand galvanized rope produced with a steel core, fully lubricated during manufacture produced in accordance with EN 12385. In underground mining, specially selected wire tensile grades and 6 strand construction enhance wear resistance. Specially formulated lubrication enhances wear properties, increases rope performance, and reduces environmental impact due to fly-off and the calibrated cut lengths and custom pad eyes simplify installation and reduce down-time. Excellent value for less demanding applications.

WRI® PS 630

WRI® PS 630 is a general purpose 6 strand galvanized rope produced with a steel core, fully lubricated during manufacture producing in accordance with EN 12385.

Bridon® 6 Series

Bridon® 6 series is a range of general purpose 6 stranded galvanized ropes produced with a steel core, fully lubricated during manufacture producing in accordance with EN 12385.

Bridon® 8 Series

The 8 series is a range of general purpose 8 stranded bright & galvanised ropes produced with a steel core, fully lubricated during manufacture producing in accordance with EN 12385.

Bridon Dyform® DSC10 PI

Bridon Dyform® DSC 10 PI is a high performance compacted parallel laid rope construction with all the strands within the rope being spun/twisted together in one operation.

Bridon Dyform DSC8 MAX / MAX PI®

Bridon Dyform® DSC8 MAX / MAX PI is a high performance compacted double seale closed, parallel laid construction rope, with all the strands within the rope being spun/ twisted together in one operation. Ideal for high demanding boom hoisting operations. This type of rope can only be used where both ends are fixed and the load prevented from rotating.

Bridon Dyform® DSC8 / PI

Bridon Dyform® DSC8 / PI is a high performance compacted double seale closed, parallel laid construction rope, with all the strands within the rope being spun/ twisted together in one operation. Ideal for high demanding boom hoisting operations. This type of rope can only be used where both ends are fixed and the load prevented from rotating.

Can't find what you're looking for?